We set up nat as follows:
global (outside) 1 1.2.200.10-1.2.200.250
global (outside) 1 1.2.200.251 netmask 255.255.255.255
nat (inside) 0 access-list inside_outbound_nat0_acl
nat (inside) 1 Cedar 255.255.0.0 0 0
static (inside,outside) MailOut Mailinside netmask 255.255.255.255 0 0
static (inside,outside) CHSWebOut CHSWebIn netmask 255.255.255.255 0 0
access-list inside_outbound_nat0_acl permit ip SW 255.255.255.0 any
access-list inside_outbound_nat0_acl permit ip CV 255.255.255.0 any
access-list inside_outbound_nat0_acl permit ip CE 255.255.255.0 any
access-list inside_outbound_nat0_acl permit ip TMS 255.255.255.0 any
Cedar network can access mail and chsweb but the rest of the network gets an outside dns - i.e. the nat is not translating the address?
Show xlate results:
Global CHSWebOut Local CHSWebIn
Global MailOut Local Mailinside
What am I missing here?