I have a PIX 515E with boot problem. These are the lines I received from the console:
CISCO SYSTEMS PIX FIREWALL
Embedded BIOS Version 4.3.207 01/02/02 16:12:22.73
Compiled by morlee
32 MB RAM
PCI Device Table.
Bus Dev Func VendID DevID Class Irq
00 00 00 8086 7192 Host Bridge
00 07 00 8086 7110 ISA Bridge
00 07 01 8086 7111 IDE Controller
00 07 02 8086 7112 Serial Bus 9
00 07 03 8086 7113 PCI Bridge
00 0D 00 8086 1209 Ethernet 11
00 0E 00 8086 1209 Ethernet 10
00 11 00 8086 1229 Ethernet 11
Cisco Secure PIX Firewall BIOS (4.2) #0: Mon Dec 31 08:34:35 PST 2001
Platform PIX-515E
System Flash=E28F128J3 @ 0xfff00000
Use BREAK or ESC to interrupt flash boot.
Use SPACE to begin flash boot immediately.
Reading 1937920 bytes of image from flash.
#########################################################################################################
32MB RAM
mcwa i82559 Ethernet at irq 11 MAC: 000d.65fb.bd40
mcwa i82559 Ethernet at irq 10 MAC: 000d.65fb.bd3f
After that the pix do not answers or display more lines.
I want to know if this error is due hardware or IOS problem.
Thanks in advanced
