PIX 515ER upgrade from 6.3(4) to 6.3(5) and PDM

[vincent-n]

Hi all

I'm in search for documentations on upgrading a PIX515ER v6.3(4) to v6.3(5) and PDM v 3.0(2) to PDM v3.0(4) but can't find them anywhere. Can you please help. Any extra tips on the upgrade process is greatly appreciated.

[lreger · Accepted solution]

http://www.cisco.com/en/US/docs/security/pix/pix61/configuration/guide/upgrade.html

http://www.cisco.com/en/US/products/hw/vpndevc/ps2030/products_tech_note09186a0080094a5d.shtml

[vincent-n]

Damn, that was quick. Thanks.

[vincent-n]

Just another question then regarding the upgrading procedures

1. Disconnect the primary unit and upgrade using 'copy tftp flash'

2. Upgrade PDM following http://www.cisco.com/en/US/docs/security/pix/pix63/pdm30/installation/guide/pdm30CH3.html

3. Power up the primary unit - my question here is what would happen to the standby unit now that it's running 6.3(4) and the primary unit is 6.3(5)?