Guys what am I missing here? I have an permit ip any any from my inside to my outside interface. Yet rhapsody will not get past the DRM stage of install. I don't have any of the sites it wants to access blocked by domain or IP in the my rules.
Windows media player has no issues getting out and playing content, just rhapsody player 11 (the old real player).
If the rhapsody web client is used, no problems accessing music on the site.
But if the local client is used, it won't get past the "DRM" check which needs.
Their FAQ states:
TCP 80, 554, 4040, 7070, 8080, 443 (SSL for sign in), 1755 (MMS Windows Media requests)
UDP 6970-32,000, 1755 (MMS Windows Media resend requests)
HTTP 80 (3AU, Messaging Service, and HTTP Cloaking)
All the above covered by IP any any from inside to outside right?
Looks like I need to put some "fixup" commands into the pix to allow this horrible service in. Looks like they are called "inspect" with v7. And since the defaults are enabled, need to setup a new class-map with whatever port range rhapsody support gives me.
With the enhancements in ISE 3.0 for integrating with Azure AD via SAML IdP, it is now possible to leverage Microsoft Single Sign-On for multiple ISE Portals (for example Sponsor and Guest/BYOD Portals).
At the time of this writing, ISE cann...
With the enhancements in ISE 3.0 for integrating with Azure AD via SAML IdP, it is now possible to create a BYOD Flow to provide Wireless network access using an employee’s Azure AD credentials.
The table below shows the whole Cisco Security solutions + Splunk integrations add-ons. Kindly let me know if I have missed some add-ons or if there are any new updates. Thank you!
Hope this will be helpful for everyone who is looking for Splunk in...
A python based script to generate report if there are disabled rules under an Access Control Policy and an option to delete those rules in bulk.
Step 1 Download the script on PCStep 2 Make sure python3 is installed on PC and have reach...
A python based script to generate report if there are double logging on FMC ACP (logging at beginning and end), having rule action "Allow" or "Trust". (Option1 )
Also, the logging at the begging will be disabled if logging is detected for both beginning ...