PIX connection Timeout

[banalas_2]

I have PIX 525 with 6.3 IOS, I have web application behind the firewall because of connection timeout 60 minuties, its response is slow after timeout, how can i increase the connection timeout

Thanks

Srid

[Collin Clark]

The default is 1:30, did you change it to 1:00?

[Patrick Iseli]

Here the default timeout parameters : Which is 60 minutes by default !

timeout xlate 3:00:00

timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02 rpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 sip 0:30:00 sip_media 0:02:00

timeout uauth 0:05:00 absolute

Reference :

http://www.cisco.com/en/US/products/sw/secursw/ps2120/products_command_reference_chapter09186a00801727ae.html#wp1026093

conn hh[:mm[:ss]]

Idle time after which a connection closes. Use 0:0:0 for the time value to never time out a connection. This duration must be at least 5 minutes. The default is 1 hour.

sincerely

Patrick

[banalas_2]

thanks for your help