04-12-2006 07:31 PM - edited 02-21-2020 12:50 AM
HI all,
I have PIX 506E as ainternet gaetway for my ISP and suddenly after successfull running of 2hr internet disconnected and then automatically connects.
And sometimes the bandwitch rate become slow .
Is their any kind way where i can check what is going from pix inside to outside and whts coming from outside to inside
Thanks
Chetan
04-12-2006 10:06 PM
Hi
the only thing you can check is "sh conn". it will show you IP address and port information of traffic coming in and out.
regards
aashish C
04-12-2006 10:36 PM
Thanks
Is there any way to capture all the interfaces incoming and outging traffic
04-12-2006 11:07 PM
incase you want detailed reporting of the traffic going out and coming in the PIX, then you need to configure Accounting on PIX. Here is the URL which will help you in configuring it on PIX :
http://www.cisco.com/univercd/cc/td/doc/product/iaabu/pix/pix_sw/v_63/cmdref/ab.htm#wp1073208
regards
aashish C
04-13-2006 01:03 AM
PIX has great feature for capturing packets
try command capture
Details are here:
M.
Hope that helps, rate if it does
04-13-2006 05:22 AM
Hello,
does your outside interface get a DHCP-assigned address from your provider ? If this happens every 2 hours, it might be that your provider has a very low lease time. Have you contacted the provider (which could be useful anyway, to see if they can see problems on their equipment/lines) ?
Regards,
GNT
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide