10-09-2008 04:05 AM - edited 03-11-2019 06:55 AM
I have a PIX 515 with IOS 6.3.
1) I'm trying to upgrade to IOS 7.0 but can't seem to find the download for it. All I see here is router IOS: http://tools.cisco.com/support/downloads/go/Redirect.x?mdfid=268438303
Are they one in the same?
2) When I upgrade from 6.3 to 7.0, what major alterations will I need to make to the existing running-config? Right now it is a pretty basic firewall. Basic port forwarding, statics, and a few VPN user groups are in, but that's about it.
Thanks for any help.
Still learning the Cisco Firewall side of the world.
Solved! Go to Solution.
10-09-2008 04:29 AM
Scott,
If you have cco access to download area go directly here. The code for PIX platform is found here as well.
http://www.cisco.com/cgi-bin/tablebuild.pl/pix
Also from the same link above another link, this one to provide you with all you need to know requirements, depricated commands etc..prior to upgrading code.
http://www.cisco.com/en/US/docs/security/asa/asa70/pix_upgrade/upgrade/guide/pixupgrd.html
Rgds
Jorge
10-09-2008 04:29 AM
Scott,
If you have cco access to download area go directly here. The code for PIX platform is found here as well.
http://www.cisco.com/cgi-bin/tablebuild.pl/pix
Also from the same link above another link, this one to provide you with all you need to know requirements, depricated commands etc..prior to upgrading code.
http://www.cisco.com/en/US/docs/security/asa/asa70/pix_upgrade/upgrade/guide/pixupgrd.html
Rgds
Jorge
10-09-2008 05:24 AM
Thanks, Jorge!
That's exactly what I needed!
I have no idea how you found that link, but I was searching all of Cisco's site. Gah.
Thanks again!
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide