Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hello,Due to some paperwork requirements, I am looking for any documentation stating what the ASR1002-HX Energy Star or EPEAT certification's are. https://www.cisco.com/c/en/us/products/collateral/routers/asr-1000-series-aggregation-services-routers/...
Hello all,
CustomerRTR1 -- PE -- OrgRTR1 -- OrgRTR2 -- CustomerRTR2
I'm trying to get CustomerRTR1 pinging to CustomerRTR2. PE has multiple Customer L3VPNs.PE connects to OrgRTR1 and passes CustomerRTR1 traffic via routed subinterface port (no MP-BGP...
Hello all,
For the past week I have been unable to connect from my Windows 10 computer to an ASA5505. Each time I try to connect via my standard profiles over IKEv2/IPSEC, I get the error in the attached screenshot. Some facts:
-Exact setup has b...
Hello,
I'm having an issue with downloading the client certificate for AnyConnect clients.
Right now I have a Local CA defined on my ASA5505 9.1.6 and a Split Tunnel profile setup to authenticate via Certificate.
From a remote site, I can access http...
Hello,I have an ASA whose Outside interface is obtaining DHCP IP & Default Gateway. When I look at the DHCP Client Lease Information I see: Client-ID: cisco-xxxx.xxxx.xxxx-outside-HOSTNAME where x=MAC and HOSTNAME=configured ASA hostname.I am trying...
I know this is years old, but Google brought me here and put me down the right path to fix, so I thought I'd share: I had a very similar problem: ASR1k, Gi1/0/0 connected to ISP that is handing out DHCP, but no IP would come up. Long story short, it...
Thank you for the 3rd party material, BB. Should I assume that since a 3rd party ran the tests, that there is no Energy Star Certification for the ASR1000 platform?Thanks again.
This would be for home/lab use initially, so mainly netflow/syslog. The goal is for bandwidth monitoring and statistics. But ideally I'd want to be able to see which host was talking to which endpoint & details (protocol, port, bytes, time, etc).
A...
Do you mind elaborating, Jason? I've been reading up on this and it looks interesting. Thinking of building up a VM and playing around with it.
Details? Screenshots?
Thanks for any information!
You should be getting more than 35/40Mbps down.
I use a 5505 for my home connection and have 100/10 from my provider. I just tested and was getting 87 down and a little over 10 up. If you're getting half that, something is wrong.
I would double ch...
