Hi,
here's my setup:
Internet
|
T1
|
Cisco 1721
a.b.c.2
|
|
a.b.c.1
Cisco PIX 501
192.168.0.1/24
|
|
|
|
192.168.0.200/24
Netopia
|
ISDN
|
Netopia
192.168.2.200/24
For some reason, I can't reach the 192.168.2.0 subnet from a client PC. I have added a static route to the PIX (route inside 192.168.2.0 255.255.255.0 192.168.0.200 255.255.255.0 1) which will allow me to ping the remote network from the PIX, but not from my network. I seem to be missing something. This setup works fine with another NAT box in place of the PIX, so the netopias are configured fine.
Anyone with any insights, my config follows:
PIX Version 6.2(2)
nameif ethernet0 outside security0
nameif ethernet1 inside security100
hostname rtpdpix
domain-name rtpd.local
clock timezone CST -6
clock summer-time CDT recurring
fixup protocol ftp 21
fixup protocol http 80
fixup protocol h323 h225 1720
fixup protocol h323 ras 1718-1719
fixup protocol ils 389
fixup protocol rsh 514
fixup protocol rtsp 554
fixup protocol smtp 25
fixup protocol sqlnet 1521
fixup protocol sip 5060
fixup protocol skinny 2000
names
access-list 100 permit icmp any any echo-reply
access-list 100 permit icmp any any time-exceeded
access-list 100 permit icmp any any unreachable
access-list 100 permit tcp any any eq 9054
pager lines 24
interface ethernet0 10baset
interface ethernet1 10full
mtu outside 1500
mtu inside 1500
ip address outside a.b.c.1 255.255.255.240
ip address inside 192.168.0.1 255.255.255.0
ip audit info action alarm
ip audit attack action alarm
pdm location 192.168.0.33 255.255.255.255 inside
pdm logging informational 100
pdm history enable
arp timeout 14400
global (outside) 1 interface
nat (inside) 1 0.0.0.0 0.0.0.0 0 0
static (inside,outside) tcp interface 9054 192.168.0.33 9054 netmask 255.255.255.255 0 0
access-group 100 in interface outside
route outside 0.0.0.0 0.0.0.0 a.b.c.2 1
timeout xlate 3:00:00
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 rpc 0:10:00 h323 0:05:00 sip 0:30:00 sip_media 0:02:00
timeout uauth 0:05:00 absolute
aaa-server TACACS+ protocol tacacs+
aaa-server RADIUS protocol radius
aaa-server LOCAL protocol local
ntp server a.b.c.d source outside
http server enable
http 192.168.0.0 255.255.255.0 inside
no snmp-server location
no snmp-server contact
snmp-server community public
no snmp-server enable traps
floodguard enable
no sysopt route dnat
telnet 192.168.0.0 255.255.255.0 inside
telnet timeout 5
ssh timeout 5
terminal width 80
: end
