03-31-2005 10:16 PM - edited 02-21-2020 12:03 AM
We have two private network 192.168.10.0/24 and 172.16.1.0/24.Before it was connected with cisco 3745.Now we have replaced the router with PIX 525.
network 192.168.10.0/24 connected to INTF4 and network 172.16.1.0/24 connected to INSIDE.
Now problem is when I tried to transfer the file (637mb)from host 192.168.10.4(intf4) to host 172.16.1.10(inside) it takes around 170 minutes where as before it takes only about 3 minutes.
What may be the actual problem please help me.
03-31-2005 10:36 PM
This sounds like DUPLEX MODE problems check your interface settings and set to:
PIX auto - SWITCH auto
PIX full duplex - SWITCH full duplex
etc
See the "show interface" command to see if you have errors.
siincerely
Patrick
04-01-2005 01:01 AM
Great :)
Thanks a Lot..
That is the exact problem.
I have change it in switch and solved the problem.
But I wonder why it happens only in PIX.??
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide