Port to application mapping on asa

[alkabeer80]

Hi,

i have cisco asa 8.4, i am using simple topology on gns3:

R1  ----------------------------------(inisde) ASA (outside) ------------------------------ R2

192.168.1.1               192.168.1.2           192.168.2.2                           192.168.2.1 

I have enabled http on R1, telnet from R2 to R1 (telnet 192.168.1.1 80) , it work.

Now i want to configure ASA to port map 80 to 8080,  telnet from R2 to R1 ( telnet 192.168.1.1 8080) , how can i do it ?

Thankssss

[Jouni Forss]

Hi,

You could take a look at the document I have made here on the forums. It contains some examples of basic NAT configurations. It still work in progress

Here is the link

https://supportforums.cisco.com/docs/DOC-31116

Hope this helps

- Jouni