public ip in site to site vpn

[prashantrecon]

Hi

I have lan range 10.x.x.x/24 Now I have natted with public ip.

In the site to site vpn how can i use for interseting traffic

can anyone guide me with an example

[ajay chauhan]

Hi Prashant,

Question is not very clear what you are trying to achive ?

Thanks

Ajay

[prashantrecon]

Hi Ajay,

We want to create site to site vpn , lan range is 10..x.x.x.

The above range is geeting conflict with far end.

we are thinking to map the lan range with public ip 202.x.x.x

and share this ip as interseting traffic with far end.

Is it possible first , IF yes can u guide me.

[ajay chauhan]

Hi Prashant,

Take a look on below mentioned link - Hope this help.

http://www.cisco.com/en/US/products/ps6120/products_configuration_example09186a0080b37d0b.shtml

Thanks

Ajay

[prashantrecon]

Hi Ajay,

here 10.x.x.x is the interseting trafiic , 202.x.x.x is public ip

access-list outside_2_cryptomap extended permit ip 10.x.x.x 255.0.0.0 192.168.x.x 255.0.0.0

access-list policynat extended pemit ip 10.x.x.x 255.0.0.0 192.168.x.x 255.0.0.0

static(inside,outside) 202.x.x.x acees-list policynat

Is the config correct