connected laptop to wireless network (Cisco APS and WLC)
laptop gets correct IP info from DHCP
can ping clients in same subnet (VLAN)
cannot ping or any other protocol to other subnets behind FWSM
get error (example with ping)
3 Dec 27 2012 17:02:58 305006 130.2.4.115 regular translation creation failed for icmp src Wireless-Users:x.x.x.x dst old_servers:x.x.x.x(type 8, code 0)
after a few hours it started working - but i would like to understand what the problem was.
on the web i found some info about NAT
but in this case the are no static NAT configured
all other clients in same subnet are OK
if i manually set a different IP from same subnet the client works.
i set the problem IP manually on a different laptop (disconnected the first) and had same problem
so its somthing about the specific IP i was using
thanks
