05-26-2020 10:11 AM
Greetings!
I am very new to NX-OS, and it has been an uphill battle getting everything working. My current issue is that I cannot get my aaa shared keys to encrypt. They are set on level 7 but when I perform a show run, it shows in clear text on most of the switches. On one switch (identical configuration for now) it has encrypted, but cannot get the others to follow in its footsteps. Does anyone have any advice on what the issue might be?
05-26-2020 11:39 AM
never seen this before
here is the example :
You can configure preshared keys at the global level for all servers used by the Nexus 5000 Series switch. A preshared key is a shared secret text string between the Nexus 5000 Series switch and the RADIUS server hosts.
To configure global preshared keys, obtain the preshared key values for the remote RADIUS servers and perform this task:
01-10-2024 03:13 PM
Try adding
service password-encryption
01-15-2024 05:35 AM
On NX-OS it is actually a feature command, not a service command. The service command applies to IOS devices.
N7K(config)# feature password encryption ?
aes Encrypt using AES encryption standard
01-15-2024 06:13 AM
service password-encryption
what is the error you getting, have added feature ?
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide