Redirect many ports

[Tauer Drumond]

Hi all..

Im redirecting ftp request for IP address 10.10.10.5 to 192.168.0.5 by entering the following command:

static (DMZ,inside) tcp 10.10.10.5 ftp 192.168.0.5 ftp netmask 255.255.255.255.

Its working fine.

But I need to add 20 diferents ports and redirect them to ftp port.

Do I have to add 20 diferents commands on ASA??? Or is there anyway to do that on a simple command?

Thanks!

[andrew.prince · Accepted solution]

It's on a port by port basis:-

http://www.cisco.com/en/US/customer/products/hw/vpndevc/ps2030/products_tech_note09186a00804708b4.shtml

HTH>

[Tauer Drumond]

Hi Andrew,

on the link, I just found redirect from one port to one port...

And I want to redirect many ports to only one port...

Can you show me an example?

[andrew.prince]

You mis-understand, what you want to do, I think is not possible - you must configure them 1 by 1.

[Tauer Drumond]

Oh...ok...

I really mis-understood...

Anyway...thank you about your clarify...

Regards