Network Security

Hi, I just need to know if URL filtering is possible in PIX 535 without external server and whether it is possible in ASA. If so, which series?thanks in advanceRajesh

Hi all,I would like to know if there is any kind of workaround to have Ipv6 in a ASA with an active/standby failover configuration. The problem starts when the secondary ASA becomes Active, because in every “ipv6 enable” interface both link-local...

Hi, Can anyone post a link in which we would see the redundancy between FW, switches and Servers with configuration? Thnaks

Can this only be performed on ASA appliances, or can it be done on a pair of PIX 515-E's, that currently run 7.x code, and we just want to bump it up another revision? And has anyone done a zero downtime upgrade and is it truly non-disruptive?

Hello, i have one pix 501. My internal server win 2008 have openvpn service on 1194 port, it's possibile with pdm software add rule for forwarding 1194 port to internal ip of win2008 ?

Hi,We have decided to configure our HP Blades to send syslogs to our Ciscoworks LMS 3.0.1The Blades are: HP ProLiant BL p-Class F-GbE2 Interconnect Blades. I have setup the syslogs to point to the ip address of the Ciscowork server.How can I get Cisc...

I have a 4240 that is physically sitting in between my edge router and my ASA - One interface is connected to router and the other is connected to ASA. I have confiured Inline Interface pair. My question is to manage 4240, what option do I have? I kn...

I'm having trouble loading a digital certificate on an ASA 5520 running 8.0(4). The CA is a Fedora Dogtag Certificate System with a very simple PKI scheme running (O=CM TEST). All of this is running on an isolated test network in a lab setting.I'm ab...

Dear TeamI need to enable frag guard in PIX Firewall however i am not understanding the concept of database size in it The following is mentioned in the Cisco pdf regarding the same however i have not understood the "block" concept Setting the databa...

Hi, I am trying to perform a downgrade of PIX515E from version 7.2(2) to 7.0(4). I have found some info from the link http://www.cisco.com/en/US/products/hw/vpndevc/ps2030/products_tech_note09186a00804708d8.shtml#t6. The procedure shows downgrade of ...

Experts: We have ASA 5505 model using into all production sites and as you all know that ASA 5505 model doesn't have included IPS solution. Now is there any other way we use this services by software basis. Please Advice. Thanks

I working on a project to migrate from our active/standby PIX 525's running 6.3(5) to active/standby ASA 5510's running 7.x. My PIX uses six physical interfaces (one for failover) and I would need to use VLANs on my ASA in order to support all the ne...

Hi guys, I own a pair of Cisco ASA 5510 running version 8.x of PIX-OS in an Active/Passive failover setup, configured as router on a stick with redundant interfaces. 

shield1(config)# sh int outside 
Interface Redundant1.100 "outside", is up, ...

HiWe have a new range of public ips and need to add them to a new internal interface (not the outside one). Therefore I need to find out how to pass these IPs through the outside interface on to the new internal interface net2 without NAT.I've tried ...