Redistribute default route in ospf in FTD

[deypuchka]

Hello guys I have this topology where the inside network runs with ospf and in the ftd there is both default route and ospf ?

After configuring all this also my inside network cannot go to the internet or the isp ip.

My question is how do i redistribute default route in ospf in the ftd ?

[Rob Ingram · Accepted solution]

@deypuchka you are able to redistribute the default static route on the FTD.

From the FMC

Step 1 Choose Devices > Device Management, and edit the FTD device.
Step 2 Click Routing.
Step 3 (For a virtual-router-aware device) From the virtual routers drop-down list, choose the virtual router for which you are configuring OSPF.
Step 4 Click OSPF > Advanced Settings.
Step 5 Select General, and configure the following:
- Enable Default Information Originate — Check the Enable check box to generate a default external route into an OSPF routing domain and configure the following options:

Full information - https://www.cisco.com/c/en/us/td/docs/security/firepower/70/configuration/guide/fpmc-config-guide-v70/ospf_for_firepower_threat_defense.html

[deypuchka]

@Rob IngramThank you very much is working now.

[MHM Cisco World]

friend after you config the OSPF process 
you must select FTD role and here it is 
ASBR <<- this is so important otherwise the static will not redistribute.

I am for this mission