03-03-2021 08:18 PM - edited 03-03-2021 10:00 PM
Hello All, when FTD and FMC are rebooted, the device registration is lost.
ftd> reboot
fmc> system reload
need to register FTD to FMC every time you reboot?
03-03-2021 10:33 PM
Hi Alexey,
No. It shouldn't. Are you trying to reboot both the devices at the same time?
Thank you,
Dinesh Moudgil
03-03-2021 11:56 PM
As long as it was saved and registered one time it should be permanent, until manual remove and add back
what is the version of FMC and FTD?
03-08-2021 11:50 PM
FMC
> show version
-------------------[ firepower ]--------------------
Model : Cisco Firepower Management Center for VMWare (66) Version 6.5.0 (Build 123)
UUID : fb9fd742-f680-11ea-abe5-ef3adfe18df6
Rules update version : 2019-08-12-001-vrt
VDB version : 309
----------------------------------------------------
FTD
> show version
-------------------[ firepower ]--------------------
Model : Cisco Firepower 1120 Threat Defense (78) Version 6.4 .0 (Build 102)
UUID : b5be485a-f33b-11ea-8f4d-bad27315ab23
Rules update version : 2019-08-12-001-vrt
VDB version : 309
After power of FMC/FTD or reboot FMC/FTD, the device registration is lost.
03-09-2021 06:04 AM
Try troubleshooting steps :
still, issue raise a TAC case for investigation
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide