cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
262
Views
0
Helpful
3
Replies

Remote client vpn issue

dabur10376004
Level 1
Level 1

Hi,

I have created Remote client vpn on cisco ASA 5510. when we connect from internet, its connected, ip address obtained by laptop, but I am not able to ping any LAN ip address. while below ASA, core switch(ip address 10.120.1.1) is installed.

I am getting VPN ip address is as below

10.90.7.1

255.255.255.0

10.90.7.2

core switch default route is ASA.

I am not able to ping core switch (10.120.1.1) from vpn laptop & same from core switch also.

ASA & core switch config is attached.

Note: earlier it was working, I notice when core switch added & DMZ ip configured on ASA, after that it was not working.

 

kindly help us.

 

3 Replies 3

rizwanr74
Level 7
Level 7

add these lines on your ASA.

 

your config missing a group-policy so create one new and x and y are your internal dns and wins servers.

group-policy grp-jblgroup internal
group-policy grp-jblgroup attributes
 wins-server value 10.120.1.x
 dns-server value 10.120.1.y
 default-domain value whatever-your-domain.com

 

Point your group-policy to your tunnel group and try it.

tunnel-group jblgroup general-attributes
  default-group-policy grp-jblgroup

 

Thanks

Rizwan Rafeek

Hi as per my knowledge above config is related to DNS issue. but I am not able to ping any LAN ip including Lan Gateway (10.120.1.1). Kindly suggest.

Your configuraton missing a group-policy altogether.

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: