08-06-2008 09:06 PM - edited 03-11-2019 06:27 AM
I have following vlan groups assigned to FWSM in 6500 and it is production;
firewall vlan-group 1 100,200,400,800
Now I want to remove just VLAN 800 from the group. If I enter the command;
no firewall vlan-group 1 800
will it affect the traffic in other vlan s? I want to know this from someone whoi has done it practically, becase the traffic in other segnemnts are really critical, and I want zero disturbance for them.
08-06-2008 09:43 PM
why it affect traffic in other vlans?
unless other vlans have comunications with this one
like nating or routing
08-06-2008 10:57 PM
Do you mean will "no firewall vlan-group 1 800" remove the other vlans from the vlan-group 1? Then the answer is NO!, your show run will become:
firewall vlan-group 1 100,200,400
If you mean affect in the literal sense, then only you can tell that. Pretty difficult to tell you that by seeing only one line in your ocnfig :)
Regards
Farrukh
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide