Replacing a Firepower standalone in FMC

[Translator]

Hello,

I can't find documentation to replace a Firepower in FMC when a Firepower is faulty / broken.

I would like to have a procedure or documentation to know how to do that.

Thank you in advance.  

[MHM Cisco World]

If FTD is failure abd you get new one' you need to repeat all config to new ftd 

You can not copy config from one ftd to other 

MHM

[Marvin Rhoads]

The FMC Administration Guide provides a detailed step-by-step procedure here:
https://www.cisco.com/c/en/us/td/docs/security/secure-firewall/management-center/admin/720/management-center-admin-72/tools-backup.html#Cisco_Task.dita_a44c742a-9670-4b54-b792-6ba3a3133133

[Marius Gunnerud]

If you have a backup of your FMC you should be able to restore it to the new FMC so long as it is the same hardware or virtual machine, and running the same version and VDB version as the failed FMC.