11-17-2013 02:17 AM - edited 03-11-2019 08:06 PM
I need to set route sla tracking to fail to back route in 2 sec but below config doesn't converge the route in 2 sec. Can someone guide me how to set the timer to 2 sec.
route outside 192.168.1.0 255.255.255.0 10.10.14.3 track 1
route backup 192.168.1.0 255.255.255.0 10.10.15.3 2
!
sla monitor 1
type echo protocol ipIcmpEcho 10.10.6.6 interface outside
timeout 2000
sla monitor schedule 1 life forever start-time now
track 1 rtr 1 reachability
!
11-17-2013 10:46 AM
You need to add the following command
track 1 rtr 1 reachability
--
Please rate all helpful posts
11-18-2013 12:18 AM
Sorry I missed the below command which actually i am doing in the config but its not converging route in 2 sec still taking longer than expected.
11-18-2013 02:14 AM
So the convergence is working?
How long is the failover taking?
11-18-2013 03:03 AM
its vary but takes like 50 to 60 sec.
11-18-2013 12:13 PM
Hmm. Have you tried removing the timeout 2000 command?
Could you enter the following commands and test please.
sla monitor 1
no timeout 2000
num-packets 3
frequency 10
If you are still experiencing problems please issue the following show command and post the output here.
show sla monitor operational-state 1
11-23-2013 03:12 PM
still doesnt converge route in 2 sec takes almost 10 to 30 sec
ciscoasa(config)# sh sla monitor operational-state ?
exec mode commands/options:
<1-2147483647> Entry Number
| Output modifiers
ciscoasa(config)# sh sla monitor operational-state
Entry number: 1
Modification time: 00:37:36.465 UTC Tue Nov 30 1999
Number of Octets Used by this Entry: 1480
Number of operations attempted: 23
Number of operations skipped: 0
Current seconds left in Life: Forever
Operational state of entry: Active
Last time this entry was reset: Never
Connection loss occurred: FALSE
Timeout occurred: TRUE
Over thresholds occurred: FALSE
Latest RTT (milliseconds): NoConnection/Busy/Timeout
Latest operation start time: 00:41:06.646 UTC Tue Nov 30 1999
Latest operation return code: Timeout
RTT Values:
RTTAvg: 0 RTTMin: 0 RTTMax: 0
NumOfRTT: 0 RTTSum: 0 RTTSum2: 0
11-23-2013 07:10 PM
Please send a show run all sla monitor
Value our effort and rate the assistance!
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide