cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
335
Views
0
Helpful
8
Replies

ROUTER RIP

IrfanKhan4904
Level 1
Level 1

We are using cisco switch 3650 (ROM: IOS-XE ROMMON
BOOTLDR: CAT3K_CAA Boot Loader (CAT3K_CAA-HBOOT-M) Version 4.66, RELEASE SOFTWARE (P)

How we can configure rip version 2.
"router rip
version 2
network 10.0.0.0"

8 Replies 8

balaji.bandi
Hall of Fame
Hall of Fame

You only showing ROMMON verison, show version give you what is the version of code running post full.

3650 can support as below :

The IP base feature set supports static routing and the Routing Information Protocol (RIP). For full Layer 3 routing or for fallback bridging, you must enable the IP services feature set on the standalone switch, or the active switch.

If you have valid image your configuration is valid using configuration terminal

refer below guide :

https://www.cisco.com/c/en/us/td/docs/ios-xml/ios/iproute_rip/configuration/xe-3se/3650/irr-xe-3se-3650-book/irr-rip.html

BB

***** Rate All Helpful Responses *****

How to Ask The Cisco Community for Help

 

User Access Verification

Username: irfan
Password:
CORE-SW-1#sho
CORE-SW-1#show ve
CORE-SW-1#show version
Cisco IOS Software [Denali], Catalyst L3 Switch Software (CAT3K_CAA-UNIVERSALK9-M), Version 16.3.8, RELEASE SOFTWARE (fc3)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2019 by Cisco Systems, Inc.
Compiled Wed 13-Feb-19 03:00 by mcpre


Cisco IOS-XE software, Copyright (c) 2005-2019 by cisco Systems, Inc.
All rights reserved. Certain components of Cisco IOS-XE software are
licensed under the GNU General Public License ("GPL") Version 2.0. The
software code licensed under GPL Version 2.0 is free software that comes
with ABSOLUTELY NO WARRANTY. You can redistribute and/or modify such
GPL code under the terms of GPL Version 2.0. For more details, see the
documentation or "License Notice" file accompanying the IOS-XE software,
or the applicable URL provided on the flyer accompanying the IOS-XE
software.


ROM: IOS-XE ROMMON
BOOTLDR: CAT3K_CAA Boot Loader (CAT3K_CAA-HBOOT-M) Version 4.66, RELEASE SOFTWARE (P)

CORE-SW-1 uptime is 1 hour, 2 minutes
Uptime for this control processor is 1 hour, 5 minutes
System returned to ROM by Power Failure
System image file is "flash:packages.conf"
Last reload reason: Power Failure

 

This product contains cryptographic features and is subject to United
States and local country laws governing import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply
third-party authority to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
compliance with U.S. and local country laws. By using this product you
agree to comply with applicable laws and regulations. If you are unable
to comply with U.S. and local laws, return this product immediately.

A summary of U.S. laws governing Cisco cryptographic products may be found at:
http://www.cisco.com/wwl/export/crypto/tool/stqrg.html

If you require further assistance please contact us by sending email to
export@cisco.com.


Technology Package License Information:

-----------------------------------------------------------------
Technology-package Technology-package
Current Type Next reboot
------------------------------------------------------------------
lanbasek9 Permanent lanbasek9

cisco WS-C3650-24PS (MIPS) processor (revision D0) with 865672K/6147K bytes of memory.
Processor board ID FDO1904E47R
7 Virtual Ethernet interfaces
28 Gigabit Ethernet interfaces
2048K bytes of non-volatile configuration memory.
4194304K bytes of physical memory.
250456K bytes of Crash Files at crashinfo:.
1609272K bytes of Flash at flash:.
0K bytes of at webui:.

Base Ethernet MAC Address : a8:9d:21:56:87:80
Motherboard Assembly Number : 73-15128-05
Motherboard Serial Number : FDO19050AUD
Model Revision Number : D0
Motherboard Revision Number : B0
Model Number : WS-C3650-24PS
System Serial Number : FDO1904E47R


Switch Ports Model SW Version SW Image Mode
------ ----- ----- ---------- ---------- ----
* 1 28 WS-C3650-24PS 16.3.8 CAT3K_CAA-UNIVERSALK9 INSTALL


Configuration register is 0x102

CORE-SW-1#
CORE-SW-1#
CORE-SW-1#

CORE-SW-1#dir flash:
Directory of flash:/

7746 -rw- 2097152 Jun 10 2024 04:31:24 -23:00 nvram_config
7747 -rw- 2097152 Jun 10 2024 04:31:24 -23:00 nvram_config_bkup
7748 -rw- 15938176 Jun 14 2020 07:06:45 -23:00 cat3k_caa-guestshell.16.03.08.SPA.pkg
7749 -rw- 22306936 Jun 14 2020 07:06:45 -23:00 cat3k_caa-rpbase.16.03.08.SPA.pkg
7750 -rw- 264563320 Jun 14 2020 07:06:46 -23:00 cat3k_caa-rpcore.16.03.08.SPA.pkg
7751 -rw- 9671296 Jun 14 2020 07:06:46 -23:00 cat3k_caa-srdriver.16.03.08.SPA.pkg
7752 -rw- 209654388 Jun 14 2020 07:06:47 -23:00 cat3k_caa-wcm.16.03.08.SPA.pkg
7753 -rw- 13439612 Jun 14 2020 07:06:47 -23:00 cat3k_caa-webui.16.03.08.SPA.pkg
7754 -rw- 3961 Jun 14 2020 07:06:47 -23:00 packages.conf
7755 -rw- 518 Jun 10 2024 04:11:02 -23:00 bootloader_evt_handle.log
38721 drwx 4096 Jun 14 2020 07:14:00 -23:00 core
46465 drwx 4096 Jun 14 2020 07:09:01 -23:00 .prst_sync
61953 drwx 4096 Jun 14 2020 07:09:02 -23:00 .rollback_timer
69697 drwx 4096 Jun 10 2024 04:11:15 -23:00 dc_profile_dir
69699 drwx 4096 Jun 14 2020 07:09:10 -23:00 gs_script
7756 -rw- 76 Jun 10 2024 04:11:16 -23:00 boothelper.log
7757 -rw- 65568 Jun 10 2024 04:11:33 -23:00 memleak.tcl
77441 drwx 4096 Jun 14 2020 07:09:39 -23:00 .installer
7758 -rw- 35 May 29 2022 12:41:24 -23:00 pnp-tech-time
7759 -rw- 57249 May 29 2022 12:41:35 -23:00 pnp-tech-discovery-summary
7760 -rw- 1351680 Aug 21 2023 04:10:50 -23:00 nbar2_http_default.tar
38723 drwx 4096 Aug 21 2023 04:10:54 -23:00 nbar2
7761 -rw- 916 Jun 10 2024 03:23:40 -23:00 vlan.dat

You have Lanbase License - as i remember you need IP base to work RIP, but checking  feature navigator it support, so you can test by issue that command ? is that command not available ? 

check SDM template :

https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst3650/software/release/3se/system_management/configuration_guide/b_sm_3se_3650_cg/b_sm_3se_3650_cg_chapter_01100.html

balajibandi_0-1718085736376.png

 

Look at the feature navigator :

https://cfnng.cisco.com/browse/switching/products

BB

***** Rate All Helpful Responses *****

How to Ask The Cisco Community for Help

dir flash:
Directory of flash:/

7746 -rw- 2097152 Jun 10 2024 04:31:24 -23:00 nvram_config
7747 -rw- 2097152 Jun 10 2024 04:31:24 -23:00 nvram_config_bkup
7748 -rw- 15938176 Jun 14 2020 07:06:45 -23:00 cat3k_caa-guestshell.16.03.08.SPA.pkg
7749 -rw- 22306936 Jun 14 2020 07:06:45 -23:00 cat3k_caa-rpbase.16.03.08.SPA.pkg
7750 -rw- 264563320 Jun 14 2020 07:06:46 -23:00 cat3k_caa-rpcore.16.03.08.SPA.pkg
7751 -rw- 9671296 Jun 14 2020 07:06:46 -23:00 cat3k_caa-srdriver.16.03.08.SPA.pkg
7752 -rw- 209654388 Jun 14 2020 07:06:47 -23:00 cat3k_caa-wcm.16.03.08.SPA.pkg
7753 -rw- 13439612 Jun 14 2020 07:06:47 -23:00 cat3k_caa-webui.16.03.08.SPA.pkg
7754 -rw- 3961 Jun 14 2020 07:06:47 -23:00 packages.conf
7755 -rw- 518 Jun 10 2024 04:11:02 -23:00 bootloader_evt_handle.log
38721 drwx 4096 Jun 14 2020 07:14:00 -23:00 core
46465 drwx 4096 Jun 14 2020 07:09:01 -23:00 .prst_sync
61953 drwx 4096 Jun 14 2020 07:09:02 -23:00 .rollback_timer
69697 drwx 4096 Jun 10 2024 04:11:15 -23:00 dc_profile_dir
69699 drwx 4096 Jun 14 2020 07:09:10 -23:00 gs_script
7756 -rw- 76 Jun 10 2024 04:11:16 -23:00 boothelper.log
7757 -rw- 65568 Jun 10 2024 04:11:33 -23:00 memleak.tcl
77441 drwx 4096 Jun 14 2020 07:09:39 -23:00 .installer
7758 -rw- 35 May 29 2022 12:41:24 -23:00 pnp-tech-time
7759 -rw- 57249 May 29 2022 12:41:35 -23:00 pnp-tech-discovery-summary
7760 -rw- 1351680 Aug 21 2023 04:10:50 -23:00 nbar2_http_default.tar
38723 drwx 4096 Aug 21 2023 04:10:54 -23:00 nbar2
7761 -rw- 916 Jun 10 2024 03:23:40 -23:00 vlan.dat

i am not seeing RIP in cisco 3650 switch.

check show sdm template if you can - i have provided the guide to change sdm prefer template.

what is the error you getting

config t

router rip ? -- what error you get ?

BB

***** Rate All Helpful Responses *****

How to Ask The Cisco Community for Help

i am not seeing RIP in cisco 3650

Review Cisco Networking for a $25 gift card