09-08-2003 07:08 AM - edited 02-20-2020 10:58 PM
does 6.3(3) support RIP also apart from ospf , if not how come one of the caveats is that RIPv2 mcast updates are sent across an interface that has no rip enabled on it.
Solved! Go to Solution.
09-08-2003 07:14 AM
Hi,
PIX 6.3 code supports both RIP (v1 and v2) and OSPF. The caveat is that you cannot configure both RIP and OSPF on the same PIX. You must choose which one you want to use. Hope this helps.
Scott
09-08-2003 07:14 AM
Hi,
PIX 6.3 code supports both RIP (v1 and v2) and OSPF. The caveat is that you cannot configure both RIP and OSPF on the same PIX. You must choose which one you want to use. Hope this helps.
Scott
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide