cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements

318
Views
0
Helpful
2
Replies
Highlighted
Explorer

Same IP for multiple hops with all recommended commands applied.

MY-4506#traceroute 10.196.208.51
Type escape sequence to abort.
Tracing the route to 10.196.208.51
VRF info: (vrf in name/id, vrf out name/id)
1 192.168.173.1 0 msec 4 msec 0 msec
2 10.196.208.51 116 msec 120 msec 116 msec
3 10.196.208.51 116 msec 120 msec 120 msec
4 10.196.208.51 120 msec 120 msec 124 msec
5 10.196.208.51 160 msec 160 msec 152 msec

6 10.196.208.51 160 msec 216 msec 160 msec
7 10.196.208.51 176 msec 180 msec 180 msec
8 10.196.208.51 180 msec 180 msec 184 msec
9 * * *
10 * * *
11 *

 

MY-FW1# sh access-list outside_access_in2
access-list outside_access_in2; 2 elements; name hash: 0xaad05234
access-list outside_access_in2 line 1 remark ICMP type 11 for Windows Traceroute
access-list outside_access_in2 line 2 extended permit icmp any any time-exceeded (hitcnt=69) 0xd2fb56da
access-list outside_access_in2 line 3 remark ICMP type 3 for Cisco and Linux
access-list outside_access_in2 line 4 extended permit icmp any any unreachable (hitcnt=6) 0x03a270b6

 

MY-FW1#
policy-map type inspect dns preset_dns_map
parameters
message-length maximum 1024
policy-map global_policy
class inspection_default
inspect dns preset_dns_map
inspect ftp
inspect http
inspect ils
inspect pptp
inspect rsh
inspect skinny
inspect sqlnet
inspect tftp
inspect ip-options
inspect icmp error
inspect icmp
class class-default
user-statistics accounting
set connection decrement-ttl

access-group outside_access_in2 in interface outside2

2 REPLIES 2
Highlighted
VIP Advocate

Re: Same IP for multiple hops with all recommended commands applied.

Hi,

It seems wrong with routing or ASA config. Please share topology, routing table and configuration if possible.

 

Regards,

Deepak Kumar

Regards,
Deepak Kumar,
Don't forget to vote and accept the solution If this comment will make help you!
Highlighted
Explorer

Re: Same IP for multiple hops with all recommended commands applied.

anyone? Help? :)