02-22-2011 12:56 PM - edited 03-11-2019 12:54 PM
Could somebody please send me a good link on how to set up a site to site VPN between the ASA 5510 ver 8.2(1) and Cisco 3825 ios 12.4(24)T3?
The CLI commands in the ASA is a bit different than the router CLI commands.
Thanks in advance.
Delfino
Solved! Go to Solution.
02-22-2011 01:06 PM
Hi Delfino,
This guide will show you how to setup a basic site-to-site tunnel on the ASA:
http://www.cisco.com/en/US/docs/security/asa/asa82/configuration/guide/site2sit.html
The first half of this configuration example shows a site-to-site tunnel built between an ASA and an IOS router:
http://www.cisco.com/en/US/products/ps5855/products_configuration_example09186a00809c7171.shtml#net
Hope that helps.
-Mike
02-22-2011 01:06 PM
Hi Delfino,
This guide will show you how to setup a basic site-to-site tunnel on the ASA:
http://www.cisco.com/en/US/docs/security/asa/asa82/configuration/guide/site2sit.html
The first half of this configuration example shows a site-to-site tunnel built between an ASA and an IOS router:
http://www.cisco.com/en/US/products/ps5855/products_configuration_example09186a00809c7171.shtml#net
Hope that helps.
-Mike
02-22-2011 01:56 PM
Mike,
Thanks. I will start working on it.
Del
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide