Hello All,
We are using a FMC with 2 FTDs.
we are trying to configure the FTDs to send SNMP traps to an SNMP Server using the Platform Policy in FMC.
It does not look like we are receiving SNMPV3 traps messages on the SNMP server after events like rebooting the FTD.
we have assigned an IP address to the Diagnostic Interface and used it to send SNMP traps.
Should we use the diagnostic interface for communications with our SNMP server?
Show can we diagnose this SNMPV3 issue knowing that the FTD device pings the IP Address of the SNMP Server.
Patrice
