05-10-2005 05:51 AM - edited 02-21-2020 12:08 AM
HELP HELP HELP!!!!!!!!!!!!!!!!!!!!!!!!! some subnets on my network cannot go to the internet when the proxy server has been removed. i suspect that there are Ip's that are not permited. I am still learning Cisco products.....
05-13-2005 03:37 AM
Are the networks that don't work when you remove your proxy on private addresses?
Are the ones that work on public addresses?
If not are you using NAT?
Does your NAT policy include the networks that can't route out to the internet?
What are you trying to do?
Rgds
Paddy
05-13-2005 05:32 AM
Tony,
Please post some more details - your (sanitised configs) and as Paddy says, what you are trying to do.
Usistuke hivyo, uko mahali poa...
Josef.
05-15-2005 11:02 PM
The network that doesnt work is on a Private Address of 192.168.1.0/24 255.255.255.0, 192.168.2.0/24 255.255.255.0
The Network that works is on a Private Address of 192.168.3.0/24 255.255.255.0
Now these is the scenario:
network with a subnet of 192.168.1.0/24 and 192.168.2.0/24 are on different zone(ZoneA) with 192.168.2.0/24(ZoneB). These two networks are connected with a wireless of 256kb/s. The proxy server is on the network that works.
The router has NAT and includes all the networks. When we try going out to the internet without using the proxy on the ZoneA network it works but not on the ZoneB.
I want to make the ZoneB machines to go into the network without having to use the Proxy Server.
Thanks
05-15-2005 11:01 PM
The network that doesnt work is on a Private Address of 192.168.1.0/24 255.255.255.0, 192.168.2.0/24 255.255.255.0
The Network that works is on a Private Address of 192.168.3.0/24 255.255.255.0
Now these is the scenario:
network with a subnet of 192.168.1.0/24 and 192.168.2.0/24 are on different zone(ZoneA) with 192.168.2.0/24(ZoneB). These two networks are connected with a wireless of 256kb/s. The proxy server is on the network that works.
The router has NAT and includes all the networks. When we try going out to the internet without using the proxy on the ZoneA network it works but not on the ZoneB.
I want to make the ZoneB machines to go into the network without having to use the Proxy Server.
Thanks
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide