11-02-2003 11:08 PM - edited 02-20-2020 11:04 PM
Hi,
Anybody here can help me. Im having problem, when our remote office try to access our PIX 501 using ssh. I already issued the command:
ssh 202.x.x.4 255.255.255.255 outside
ssh timeout 5
And also i specify the username and password with the "priviledge 15" statement. Is theres any other syntax that i forgot?
Thanks.
mhel
11-03-2003 03:21 AM
Hello,
The Pix only support SSH version 1.
Look if your ssh client supports ssh 1.
I use putty (windows shareware) and they support ssh -1.
Also linux supports ssh-1 but you give some parameters to use ssh -1 instead of default ssh-2.
Also you have to configure local authorization:
aaa-server LOCAL protocol local
aaa authentication ssh console LOCAL
Kind regards
Edwin Gerritsen
Dhs Informatisering
11-03-2003 04:24 AM
Hi Glenn,
I'm new to PIX/VPN etc, I wanted to ask how do I setup a PIX 501 or 506 with ADSL. Our ISP will provide ADSL connection with 5 IP addresses. Can you point me in the right direction and or documents on the above matter and also on setting up VPN tunnels using the above setup. Much appreciate for any help.
Thanks.
11-03-2003 08:56 AM
mhel,
the commands that you have listed will allow the host to connect to the PIX using SSH. Have you put in the commands to create a key?
conf t
hostname steve-pix
domain-name steve.co.uk
ca generate rsa key 2048
ca save all
The above lines will generate a key to be used by your ssh connection.
Cheers,
Steve
11-07-2003 01:10 AM
Steve,
I already done that. Well thanks for your help.
Mhel
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide