Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi,Can someone put me on the right way to implement traffic shaping (QoS) for G723 traffic.Situation:Two companies connected to each other with a vpn tunnel. The hardware is Cisco 2621xm at the sublocation and on the hq location is an 2651XM.There is...
Hi,I have configured a Cisco Pix Firewall for my VPN tunnels and that is working fine when i connect to the lan where the Pix is connected.When i want to contact a server on a sublocation over the vpn tunnel i get no response.The pix can ping the ser...
Hi,I need to change the connection time out.We use an application that is outside our firewall.The application is an client server application with the client local on the network and the server outside the firewall. The users seems to loose their co...
Hello,I need some help configuring a shared security context on the fwsm.config 6509:firewall module 9 vlan-group 100,999firewall vlan-group 100 100-113firewall vlan-group 999 998,999int vlan 100 ip address 172.31.0.10 255.255.255.0 standby 1 ip 172....
Hi,Thanks for helping me out.You are right about the no nat statement for the sublocations.I add nat exemption rules for the sublocations and everything works fine.
Joerg,Thanks for helping, you found the solution for my problem. Everything works fine now.Can you explain what the function is for this statement ?sticky 30 netmask 255.255.255.255 address source timeout 20Kind regards Edwin Gerritsen
Joerg,Thanks for helping me out.I tried both solutions you provided. First in the http config i changed the sticky and https is now working but without http.This is the new config:spanning-tree vlan 100 priority 16384module ContentSwitchingModule 7 ...
Gilles,Thanks for helping me out.I´ve two configs. The first works well with http and the second works well with https. But both on the same time is the problem.Custommers connect with http to the web page and there is an automatic redirection to htt...
Hi,Thanks for helping me out.We use the following switches 6509 (IOS), 3550 and 2950.6509---L3----3550------L2----2950Between the 6509 and 3550 is a L3 link with ip address and no switchport. VLAN´s are configured on the 6509. Because there is a L3 l...
