I have a comcast business modem/router 71.194.1.31 (public) with internal address of 10.1.10.1. My firewall "PIX" outside interface is 10.1.10.3 with all routes going to 10.1.10.1. The modem/router is performing no static route function.
interface Ethernet0
description outside interface
nameif outside
security-level 0
ip address 10.1.10.3 255.255.255.0
ospf cost 10
interface Ethernet1
description inside interface
nameif inside
security-level 100
ip address 10.1.1.1 255.255.0.0
ospf cost 10
route outside 0.0.0.0 0.0.0.0 10.1.10.1 1
I am trying to figure our how I can route RDP traffic to a server of 10.1.2.243? So I need the public address "71.194.1.31" to NAT to 10.1.2.243 with out affecting anything else. My PIX does not support PAT, its old.
I need RDP 3389 - 71.194.1.31 "public" --> 10.1.10.3 "outside" --> 10.1.1.1 "inside" --> 10.1.2.243 "server"
Thank you.
