syslog - xlate entries

[mchockalingam]

Is it possible to send the xlate table entries to a syslog server? What type of logging do I need for this?

[Jon Marshall]

Hi

Yes you can. Have a look at one of my previous posts.

http://forum.cisco.com/eforum/servlet/NetProf?page=netprof&CommCmd=MB%3Fcmd%3Dpass_through%26location%3Doutline%40%5E1%40.1dde49d4/0#selected_message

HTH

Jon

[mchockalingam]

Thank you. That was very helpful.

I have another question regarding the xlate entries and timeout. The xlate timeout is set to 3 hours which is the default. The xlate PAT entries go away once the connection gets closed. Does the xlate timeout apply only for Static NAT and Dynamic NAT entries?

thanks,

[Jon Marshall]

Hi

Glad to be of help.

Yes the PAT entries are removed once the connection gets closed. They have to be really because if they were subject to the same timeouts as the static translations then you would run out of PAT translations very quickly.

HTH

Jon

[frandolph]

The link is no longer working

[Marvin Rhoads]

@frandolph you're replying to a 16 year old post. Please start a new discussion if you have a question and provide the details for your situation.

[frandolph]

here is the new discussion

https://community.cisco.com/t5/discussions-de-s%C3%A9curit%C3%A9/how-to-send-xlate-entries-and-conn-table-to-syslog/m-p/4916275#M863