10-29-2015 01:57 PM - edited 03-11-2019 11:48 PM
Hi there,
I have the above messages in Cisco ASA. what is the action to be taken?
Background: An autocad application is trying to establish a connection autodesk.com and throws an error. I have allowed the url in the proxy. When i checked the logs in the firewall i can see the above messges. what can be done to establish the connectivity?
Application name is Autocad LT 2016
Thanks
10-30-2015 02:03 AM
I suggest running a packet tracer to see if the traffic from the PC is permitted out to the autocad.com server.
packet-tracer input <inside interface name> tcp <Local PC IP> 12345 74.220.126.91 <autocad port>
If this traffic is permitted then there is either something wrong with the autocad.com server (doubtful) or autocad.com is sending a seperate traffic stream back to the client PC which is being blocked. If the autocad.com server sends a seperate traffic stream back then you will need to find out which ports this is using and open for this on the outside interface.
--
Please remember to select a correct answer and rate helpful posts
11-04-2015 07:53 PM
https://knowledge.autodesk.com/search-result/caas/sfdcarticles/sfdcarticles/Meta-licensing.html
this is the error what i have when the application is launched. I have done as per the instructions in the url but no luck
11-04-2015 10:00 PM
Hi Venkat,
Can you verify the packet tracer command output as suggested by Marius and share your findings.
Thanks,
RS
11-05-2015 01:17 AM
in addition to running the packet tracer, make sure that if you are running any antivirus software on your PC that autodesk is not being blocked there.
--
Please remember to select a correct answer and rate helpful posts
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide