06-24-2019 11:20 PM - edited 02-21-2020 09:14 AM
Hi,
How the ips ,ngfw and threat protection throughput related to Firewall throughput
And what is the difference between the ips ,ngfw and threat protection throughput
Thanks
06-25-2019 12:21 AM
Depends on Design and network.
here is the information cisco point of view. :
06-25-2019 12:35 AM
Hi,
Depends on Design and network.
Can you give an example .?
In normal case how these throughput influence each other
Thanks
06-25-2019 10:34 PM
Hi,
Firewall Throughput (ASA) is 3 gbps and FW + AVC throughput is1750 Mbps .
Does it mean it reduces th throughput if we enable FW+AVC
Thanks
06-25-2019 11:06 PM
Yes, enabling more features generally requires the appliance to do more work (consume CPU etc.) thus it slows down.
Imagine you can run a distance at whatever speed. Now imagine running the same distance carrying a heavy load. your speed will be slower.
Only on some of the newest appliances (i.e. Firepower 4100 and 9300 series) does speed remain close to uniform despite turning on additional features. That is because they have purpose built hardware (custom ASICs, network interface cards etc.) that is designed to offload those features which might otherwise be done with additional software processing and a general purpose CPU.
06-25-2019 11:37 PM
Hi,
If I am buying a ASA5545 With FTD image , which datasheet I shoud refer ?
Why cisco says just IPS in some datasheets and some place says . NGIPS
what is the differnece between IPS and NGIPS
?
Thanks
06-26-2019 12:45 AM
Yes you add more advance features, the performance go down - since it required to process all the rules and intercept the traffic.
To be honestly - bewcuase organically grown this documents, Cisco have many cosmotic errors in the documentation
5545-X with FTD you can use ( if you buying new Device) suggest to go with firepower appliance directly rather ASA
like 2100/4XXX /9XXX depends on requirement.
Again all the models not going to support FTD check version and model before buying ASA.
IPS is traditional Cisco one
NGIPS - is the next generation IPS with Firrepower
07-01-2019 12:37 AM
Hi,
you said "5545-X with FTD you can use ( if you buying new Device) suggest to go with firepower appliance directly rather ASA"
You recommending asa 5545-x FTD or firepower appliances?
If firepower appliance which one you suggest ?
Thanks
07-01-2019 08:08 AM
Firepower Diretion 2100 / 4100 (for medium) - to replace 5545X
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide