Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Looking for some guidance on troubleshooting an intermittent voice issue.The environment consists of Genesys Contact Center integrated with CUCM and a Cisco Voice Gateway connected to the PSTN via an E1 PRI.Users are not experiencing call drops, but ...
Hi,I am attempting to apply the specified patches to UCS servers. Can I download them directly from the VMware site and apply them as I would with any other ESXi patches, or is there a specific custom build for Cisco?ESXi 5.0 / 5.1 / 5.5 / 6.0 VMSA-...
Hi,vmware -vlVMware ESXi 6.0.0 build-3073146VMware ESXi 6.0.0 Update 1console VMware ESXi 6.0.0 build-3073146-custom-Cisco-6.0.1hardware: UCSC-c220-m4sI am attempting to upgrade to version 6.5 or 7 because the VMware console displays 'VMware ESXi 6.0...
Hi,I want to enable support for TLS 1.2 and/or 1.3 and disable support for TLS 1.1. If not possible, at least disable TLS 1.0. The CUCM version is 11.5. Phone models include 7906, 7911, and 6901. All security profiles are set to non-secureThanks
I am more interested in the reverse scenario.For example, suppose the local party (6XXX) experiences silence while listening to the remote party (+9x55XXXXXX). If the same silence is observed in both the gateway capture and the phone-side capture, do...
No changes , no packet loss Does the silence occur when calling specific destinations, such as International or is it on every PSTN call? all but at random time
No . Sorry for the confusion .The remote party reported experiencing silence in the local party's voice at approximately the 200 ms mark of the call. I checked the RTP stream carrying the local party's voice in both the gateway capture and the phone-...
