Solved: Re: Traffic visibility - Restriction Option - ASA 5520

Amin Shaikh · ‎10-20-2009

Hi, I have ASA 5520 sitting between Backbone_Switch and Internet_RTR

ASA is running Site-2-Site VPN, Remote Access VPN, Inbound+Outbound SMTP and Internet_browsing

traffic for LAN users.

How could I know each service is accumulation how much bandwidth?

example ( How much internet_browsing traffic usuage in-out traffic )

Total bandwidth 6MB.

Possible to have bandwidth limitation on ASA based on services for inbound/outbound traffic ( site-2-site vpn, SMTP, RA, Internet traffic from LAN )

Panos Kampanakis · ‎10-20-2009

You can police traffic on the ASA based on service, ports, ACLs etc. https://supportforums.cisco.com/docs/DOC-1230 gives some examples of how to do it.

As for bandwidth statistics, I think you best bet is Neflow with ASA 8.2. Here is the wirki for it https://supportforums.cisco.com/docs/DOC-6113 Another choice might be ASDM top talker feature and or ACL top hits.

I hope it helps.

PK

View solution in original post

Panos Kampanakis · ‎10-20-2009

You can police traffic on the ASA based on service, ports, ACLs etc. https://supportforums.cisco.com/docs/DOC-1230 gives some examples of how to do it.

As for bandwidth statistics, I think you best bet is Neflow with ASA 8.2. Here is the wirki for it https://supportforums.cisco.com/docs/DOC-6113 Another choice might be ASDM top talker feature and or ACL top hits.

I hope it helps.

PK