cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
2016
Views
0
Helpful
1
Replies

Two routers in HSRP group in front of two PIXs, PIX in fail-over config.

mak
Level 1
Level 1

If the PIX connected to Active router in HSRP group fails how communication will happen?

1 Reply 1

s.jankowski
Level 4
Level 4

Assuming both of these routers are outside the PIX and connected to the SP. The PIX can only send its traffic to one default route OR it can listen (passively) to RIP updates. If you have RIP advertising these default routes to the PIX and one goes down, the other router should advertise itself as the new default route

Review Cisco Networking for a $25 gift card