Hi,
I currently have an MPLS network to my HQ from the office and that is working fine.
I am trying to provide SNMP access from HQ to office and everything is working fine except for 2 firewall ASA itself.
HQ via MPLS <----> 10.2.5.4/24 ASA_1 10.18.0.1/24 <----> 10.18.0.10/24 ASA_2 10.18.12.1/24 <---> LAN Network
For ASA1, security level of WAN interface (10.2.5.4) is 70 and the security level of LAN interface (10.18.0.1) is 100.
For ASA2, security level of 10.18.0.10 interface is 100.
I have added the necessary firewall rule to allow this traffic and I can confirm its working fine (as there are other network devices in the LAN is working fine) apart from the ASA itself.
I provided the IP 10.18.0.1 and 10.18.0.10 to my counterpart in HQ for them to query the 2 firewall via SNMP.
Is there anything wrong with my setup.
Thank you.
