05-26-2015 06:43 PM - edited 03-11-2019 11:00 PM
Hello ALL
I just bough a Cisco ASA5505 device, I need to lunch the ASDM and I end up with an error ((cannot display the page)) or ((you have to enable TLS 1.0, TLS 1.1, TLS 1.2)) even they are already enabled in my browser. Then I went step by step to troubleshoot the issue and I found the 3DES is not enabled! I went to Cisco website and generated activation key using my ASA serial number, when I did try to activated it I get this message ((The requested key is the SAME as the flash permanent activation-key. The flash activation key will not be modified. )) when I try to enable the 3DES using the (ssl encryption rc4-sha1 aes128-sha1 aes256-sha1 3des-sha1) command I get this error (( The 3DES/AES algorithms require a VPN-3DES-AES activation key.)) .
SO please Help
Thank you
Solved! Go to Solution.
05-26-2015 07:47 PM
Do you perhaps have a non-crypto image installed?
Please let us know the boot image filename (show ver | i bin").
05-26-2015 08:12 PM
You have the npe-k8 image. npe means no payload encryption or no crypto.
You need an image without 'npe' in the name in order to use ASDM with a modern browser that will not allow you to use the relatively insecure transport that the npe image limits you to.
05-26-2015 07:47 PM
Do you perhaps have a non-crypto image installed?
Please let us know the boot image filename (show ver | i bin").
05-26-2015 08:01 PM
05-26-2015 08:12 PM
You have the npe-k8 image. npe means no payload encryption or no crypto.
You need an image without 'npe' in the name in order to use ASDM with a modern browser that will not allow you to use the relatively insecure transport that the npe image limits you to.
05-26-2015 08:17 PM
from where I can get that image ?? I am not participate on Cisco support !! or do I have to return this Device and buy another one?? I just bought this brand new off eBay.
05-26-2015 08:25 PM
Sorry but that's the downside of buying off of eBay. It's used and not brand new, running many years old software and originally sold in a restricted export market.
It's not permited to download software which you don't have entitlement to. Giving advice on how to go about doing such would violate terms of use of this community.
You might consider purchasing Cisco support - it's relatively inexpensive for a 5505
05-26-2015 08:27 PM
I understand that Marvin, Thank you So much for the help I really wasted almost a week on this Device with no luck.
Thank you again
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide