12-29-2014 12:12 PM - edited 03-11-2019 10:16 PM
Hello,
ASA 5505 working ok...... But trying to check if there are any updates, Usually the message is something like: "No updates available".
ASA Ver: 9.2(2)4
ASDM Ver: 7.3(1)
Mem: 512 MB
Tools> Check for ASA/ASDM updates > Enter user code and password
Popup message: Update Error - Unable to upload wizard successfully.
-----------------------------------------------------
Result of the command: "sh ver"
Cisco Adaptive Security Appliance Software Version 9.2(2)4
Device Manager Version 7.3(1)
Compiled on Tue 29-Jul-14 22:39 by builders
System image file is "disk0:/asa922-4-k8.bin"
Config file at boot was "startup-config"
ciscoasa-flbk up 4 hours 12 mins
Hardware: ASA5505, 512 MB RAM, CPU Geode 500 MHz,
Internal ATA Compact Flash, 128MB
BIOS Flash M50FW080 @ 0xfff00000, 1024KB
----------------------------------------------------------
Any ideas?
Solved! Go to Solution.
12-31-2014 05:44 AM
It looks like your connectivity and credentials are OK. I've verified independently that the function works with that revision of ASDM.
I know Cisco uses Akamai's content delivery network for software distribution. So the target IP address that is used will vary according to the region you're coming from.
I'd recommend opening a TAC case to report the issue if it persists in your area.
12-29-2014 08:47 PM
I just ran it fine on a 5512-X with ASA 9.2(2)4 software and ASDM 7.3(1)101.
I chose ASDM 7.3(2) and it downloaded from Cisco and uploaded to the ASA just fine. Relaunching ASDM upgraded my local launcher instance (as expected) and it loaded fine
12-30-2014 08:56 AM
12-30-2014 11:24 AM
9.3(x) is not released for the 5505 platform.
Still, the wizard should give you the option of ASA 9.2(3) or ASDM 7.3(2) - both of which are available.
Can you login to cisco.com with your userid and see the ASA software directly? The following link should steer you there:
https://software.cisco.com/download/release.html?mdfid=280582808&flowid=4377&softwareid=280775065&release=9.2.3&relind=AVAILABLE&rellifecycle=&reltype=latest
12-30-2014 11:33 AM
Hello,
Yes, logged in to Cisco and noticed I missed quoted the Ver. 9.3(x).
Thank you for the support.
Michael
12-30-2014 11:38 AM
Is your ASA's configured DNS server reachable and resolving software.cisco.com?
A quick "ping software.cisco.com" from the ASA cli should verify that.
12-30-2014 11:51 AM
Ping Results:
Type escape sequence to abort.
No source specified. Pinging from identity interface.
Sending 5 TCP SYN requests to 72.163.4.154 port 443
from XXX.XXX.XXX.XXX, timeout is 2 seconds:
?????
Success rate is 0 percent (0/5)
Type escape sequence to abort.
No source specified. Pinging from identity interface.
Sending 5 TCP SYN requests to 72.163.4.154 port 80
from XXX.XXX.XXX.XXX, timeout is 2 seconds:
!!!!!
Success rate is 100 percent (5/5), round-trip min/avg/max = 49/49/49 ms
12-31-2014 05:44 AM
It looks like your connectivity and credentials are OK. I've verified independently that the function works with that revision of ASDM.
I know Cisco uses Akamai's content delivery network for software distribution. So the target IP address that is used will vary according to the region you're coming from.
I'd recommend opening a TAC case to report the issue if it persists in your area.
12-31-2014 08:33 AM
Hello and thank you again for your support,
Have a Happy New Year!
Michael
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide