cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
15937
Views
0
Helpful
2
Replies

Upgrade signature version on CISCO IPS

Luis Carranza
Level 1
Level 1

Hi guys:

Does anybody know the process to update the signature version on a CISCO IPS, i want to do this manually. If somedoy can tell me the commands and all I need to make this.

Regards

1 Accepted Solution

Accepted Solutions

Scott Fringer
Cisco Employee
Cisco Employee

Luis;

  Manual signature updats for Cisco IPS sensors can be performed from the CLI as outlined here:

http://www.cisco.com/en/US/docs/security/ips/7.0/configuration/guide/cli/cli_system_images.html#wp1142504

  Or from the IDM GUI as outlined here:

http://www.cisco.com/en/US/docs/security/ips/7.0/configuration/guide/idm/idm_sensor_management.html#wp2126670

  This same process is also used to upgrade the sensor's base software.

Scott

View solution in original post

2 Replies 2

Scott Fringer
Cisco Employee
Cisco Employee

Luis;

  Manual signature updats for Cisco IPS sensors can be performed from the CLI as outlined here:

http://www.cisco.com/en/US/docs/security/ips/7.0/configuration/guide/cli/cli_system_images.html#wp1142504

  Or from the IDM GUI as outlined here:

http://www.cisco.com/en/US/docs/security/ips/7.0/configuration/guide/idm/idm_sensor_management.html#wp2126670

  This same process is also used to upgrade the sensor's base software.

Scott

Thanks Scott, that information was really helpful.

Have a nice day.

Saludos

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community:

Review Cisco Networking products for a $25 gift card