vpdn commands in 7.0 asa

[kcornally]

hows the going lads,

We are about to purchase a new ASA 5505 but it will be behind a netopia DSL router . The netopia will be put into bridge mode and the vpdn configuration will be applied to the ASA.

However I have read that the VPDN commands has been replaced in 7.0 so my question is how do I go about connecting back across PPPOE without the VPDN command .

Any help is really appreciated.

Thanks.

[vitripat]

As you have a ASA-5505, you must be running 7.2 code or later. PPPoE configuration was reintroduced in this version. Here is a link which explains how to configure ASA as a PPPoE client-

http://www.cisco.com/en/US/products/ps6120/products_configuration_guide_chapter09186a008066ebe6.html

Hope that helps.

Regards,

Vibhor.