Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
HI Guys,I have the following requirement to achieve and just need to ensure that it is possible. Please see attached the relevant diagram.The Firewall in the Middle (Data Center) has only one purpose to terminate the VPNs and hair pin them . It has n...
HI Guys,I work in a company that terminated over 200 ipsec tunnels on a non cisco security product. This is all done one box with one ip. Obviously a problem. if the box falls overs.I have just started to read about dmvpn and have two really high lev...
Hi Guys,We are currently trying to re organise our switching topoloogy and i have a question about stackwise cabling.We use 3750 48 ports and 24 ports depending on how many ports we need. I have included a link to what the phyiscal network will l...
Hi guys I am trying to figure out if there is any drawbacks to peering (BGP) a 6509 switches with a downstream VRRP address of a firewall cluster . If the vrrp active member failed and the standby became active what would be the BGP convergence issue...
Hi guys,A project I have just started working on has two 6509 running VSS. My question is is it possible to FWSM in these swithes as well or are the two technologies incapabibility at this stage.Any info or documentation is welcomethanks Kevin
Hi Mohamed,thanks for clearing that up.I presume that I dont need Cisco devices at the remote ends to achieve this I only need a Cisco ASA in the Central Site to achieve this Hairpin action. In our network we have Fortinets at the remote end of the t...
Hi cisco 24x7,Funny talking about a Nokia issue on a Csico site but anyway. So the VRRP will monitor the BGP and when the standby member becomes active the BGP peering does not fail. That would be perfect if that was the case. It will be IPSO version...
