06-15-2011 07:01 AM - edited 03-11-2019 01:45 PM
Hi,
Some Internet sites suggests that there are restrictions on using of VPNs over the notion of context on Cisco ASA. Is It true?
If so, how then to enter a VPN in the best context, and how to do the mapping between the VPN and the context ?
Best regards
Solved! Go to Solution.
06-15-2011 12:00 PM
Hello!
Yes, there is restrictions.
You can't use client VPN when conmtext is enabled.
You can only use Client VPN when NOT using contexts.
Regards
06-15-2011 09:37 PM
Hi,
VPN on context is not supported.
The following link mentions "Some features are not supported, which include VPN and dynamic routing protocols."
Hope this helps.
Regards,
Anisha
P.S.: please mark this post as answered if you feel your query is resolved. Do rate helpful posts.
06-15-2011 12:00 PM
Hello!
Yes, there is restrictions.
You can't use client VPN when conmtext is enabled.
You can only use Client VPN when NOT using contexts.
Regards
06-16-2011 12:26 AM
Hi paul, Thank you for your good answer
06-15-2011 09:37 PM
Hi,
VPN on context is not supported.
The following link mentions "Some features are not supported, which include VPN and dynamic routing protocols."
Hope this helps.
Regards,
Anisha
P.S.: please mark this post as answered if you feel your query is resolved. Do rate helpful posts.
06-16-2011 12:26 AM
Hi Anisha
Thank a lot and thank you for the link.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide