04-03-2019 06:10 AM - edited 04-03-2019 06:11 AM
I have a Cisco ASA 5510. I created a new VLAN and when I VPN in and try to either RPD, PING this VLAN I can;t. I believe I see the issue but not sure how to fix it. When in the ADSM Configuration - Objects - Network Objects I see something that says inside-network and has the only VLAN I can get to when I VPN in (10.0.2.X). In the config I see this line
access-list ConnectSplitTunnel standard permit 10.0.2.0 255.255.255.0
I tried adding access-list ConnectSplitTunnel standard permit 10.0.11.0 255.255.255.0 but when I am in the ADSM under Configuration - Advanced - Standard ACL I see inside-network/24 Permit. When I edit that I see the inside-network 10.0.2.0 255.255.255.0, so shouldn't 10.0.11.0 also show there? Not as a separate entry?
04-03-2019 06:43 AM
Hi,
Please share the configuration file.
04-03-2019 07:07 AM
I figured it out Thanks..
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide