03-03-2011 10:59 PM - edited 03-11-2019 01:00 PM
Hello
I have configure one remote access VPN, now when we try to connect server from VPN client then its conneted sucessfully but when we try to conncet server then i got whole server from dmz and inside zone.
So can you help me how can we filter traffic to access limited? means like for perticular server if we want to access then what should we have to configure.
03-03-2011 11:30 PM
Hello Mitang,
You can consider using VPN filter. Here is the link :http://www.cisco.com/en/US/products/hw/vpndevc/ps2030/products_configuration_example09186a00808c9a87.shtml
Hope this helps. Please reply back if you need any further assistance.
Regards,
Chirag
P.S.: Please mark this thread as answered if you feel your query is answered. Do rate helpful posts.
03-03-2011 11:57 PM
Hello Chirag,
Thanks for update,
Actully we are working on asa803.pix.
can you suggest on this.
03-04-2011 06:05 PM
Hello Mitang,
VPN filters can be used on ASA/PIX 7.0 or above. If you are running on ASA/PIX 8.0.3, you can consider using this.http://www.cisco.com/en/US/products/hw/vpndevc/ps2030/products_configuration_example09186a00808c9a87.shtml
Hope this helps. Please reply back if you need any further assistance.
Regards,
Chirag
P.S.: Please mark this thread as answered if you feel your query is answered. Do rate helpful posts.
03-05-2011 05:28 AM
Hello chirag,
thaks for support,
this command are not available in asa803 serirs IOS.
03-05-2011 07:46 AM
Hello Mitang,
The document clearly states PIX/ASA 7.0 and later and if even i have used these commands on few occasions. Can you please paste the commands which you are trying to enter and error message you are receiving.
Regards,
Chirag
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: