11-07-2005 07:15 AM - edited 02-21-2020 12:30 AM
1, Configuration
Two VPN concentrator 3000, VPN client 4.0. The concentrators directed connect to Internet and internal LAN.
2, Question
a)Do the two concentrators have to be configured exactly the same (rules, filters) prior to enable load balance cluster? or the secondary one can download configuration from the master?
b)Can virtual ip address in cluster be all 0s?
Thanks in advance!
Solved! Go to Solution.
11-10-2005 01:19 AM
Hi
While enabling the load balancing in your VPN boxes you need to configure them to have identical configruations like as you said the rules on both private and public interfaces as well as the filters on them.
The ip addressing part also needs to be taken care on both the private and public interface also the cluster group ip should be same on both the devices.
also refer this link for more info..
http://cisco.com/en/US/products/hw/vpndevc/ps2284/products_tech_note09186a0080094b4a.shtml
regds
11-10-2005 01:19 AM
Hi
While enabling the load balancing in your VPN boxes you need to configure them to have identical configruations like as you said the rules on both private and public interfaces as well as the filters on them.
The ip addressing part also needs to be taken care on both the private and public interface also the cluster group ip should be same on both the devices.
also refer this link for more info..
http://cisco.com/en/US/products/hw/vpndevc/ps2284/products_tech_note09186a0080094b4a.shtml
regds
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide