07-30-2018 07:57 AM - edited 02-21-2020 08:02 AM
Hi All my Friend :)
What is power supply part number AC-DC for ISA 3000 / ISA-3000-4C-K9 ?
what is power supply / converter AC-DC for ISA 3000 / ISA-3000-4C-K9 ?
Maximum DC input current
• 0.5A @ 48VDC
• 1.0A @ 24VDC
• 2.0A @ 12VDC
if using PWR-IE50W- AC-IEC= :
24VDC/2.1A
over ampere
PWR-IE65W- PC-AC=
54VDC/1.2 A
over volt and ampere.
07-30-2018 10:31 PM - edited 07-30-2018 10:32 PM
Hi. It will be fine with PWR-IE50W-AC-IEC=.
The power supply in this case is voltage power supply, It should match the ammount of Volts supply and device . Current (amps) will be drained on demand as needed.
Power in watts (50 W in your case) is the result of:
24V*2.1A =~ 50W
ISA3000 uses 24V*1.0A=~24W you are just draining 24W from the power supply.
You can even use 24V /100A power supply and It'll be ok since the device will only drain the needed current. But you NEVER should use out of range voltage, you can damage device and power supply.
Best regards.
08-01-2018 08:38 AM
08-01-2018 09:51 AM
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide