Hello,
I've configure a Windows 2003 PPTP Server and i want to connect outside client through a PIX 506.
I configured the pix like the cisco example (http://www.cisco.com/warp/public/110/pix_pptp.pdf)
But the client cannot connect. Error 800 cannot find VPN Server.
I have this configuration :
access-list acl-out permit gre any any
access-list acl-out permit tcp any any eq 1723
static (inside,outside) 209.165.201.5 10.48.66.106 netmask 255.255.255.255 0 0
(This is not the real IP address :) )
access-group acl-out in interface outside
-----------
IF I HAD THIS ACCESS LIST :
access-list acl-out permit ip any any
The client can connect to my VPN Server. But it is not secure for my server.
The question :
Witch another port must i open ?
Thanks for your help
