Thanks for your quick reply sir, I am using WS-C6509-E chassis and Sup720 Card i am sending you Sh Version for this given: also please tell me the full procedure for testing this card in which slot we need to install and what version is required to test this?
Router#dir
Directory of sup-bootdisk:/
1 -rw- 33554432 Feb 2 2011 15:38:54 +00:00 sea_console.dat
2 -rw- 33554432 Feb 2 2011 15:39:38 +00:00 sea_log.dat
3 -rw- 132873524 Feb 2 2011 15:43:40 +00:00 s72033-ipservicesk9-vz.122-33.SXI4a.bin
512073728 bytes total (312090624 bytes free)
Router#sh ver
Cisco IOS Software, s72033_rp Software (s72033_rp-IPSERVICESK9-VM), Version 12.2
(33)SXI4a, RELEASE SOFTWARE (fc2)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2010 by Cisco Systems, Inc.
Compiled Fri 16-Jul-10 17:14 by prod_rel_team
ROM: System Bootstrap, Version 12.2(17r)SX7, RELEASE SOFTWARE (fc1)
Router uptime is 3 minutes
Uptime for this control processor is 2 minutes
Time since Router switched to active is 2 minutes
System returned to ROM by power cycle at 16:01:16 UTC Wed Feb 2 2011 (SP by pow
er on)
System image file is "sup-bootflash:s72033-ipservicesk9-vz.122-33.SXI4a.bin"
Last reload reason: Reload Command
This product contains cryptographic features and is subject to United
States and local country laws governing import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply
third-party authority to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
compliance with U.S. and local country laws. By using this product you
agree to comply with applicable laws and regulations. If you are unable
to comply with U.S. and local laws, return this product immediately.
A summary of U.S. laws governing Cisco cryptographic products may be found at:
http://www.cisco.com/wwl/export/crypto/tool/stqrg.html
If you require further assistance please contact us by sending email to
export@cisco.com.
cisco WS-C6509-E (R7000) processor (revision 1.4) with 516096K/8192K bytes of me
mory.
Processor board ID SMC1303005C
SR71000 CPU at 600Mhz, Implementation 1284, Rev 1.2, 512KB L2 Cache
Last reset from s/w reset
1 Virtual Ethernet interface
2 Gigabit Ethernet interfaces
1917K bytes of non-volatile configuration memory.
65536K bytes of Flash internal SIMM (Sector size 512K).
Configuration register is 0x2102
Router# sh mod 6
Mod Ports Card Type Model Serial No.
--- ----- -------------------------------------- ------------------ -----------
6 2 Supervisor Engine 720 (Active) WS-SUP720-3B SAL15056J10
Mod MAC addresses Hw Fw Sw Status
--- ---------------------------------- ------ ------------ ------------ -------
6 0025.453a.0a38 to 0025.453a.0a3b 5.12 8.5(4) 12.2(33)SXI4 Ok
Mod Sub-Module Model Serial Hw Status
---- --------------------------- ------------------ ----------- ------- -------
6 Policy Feature Card 3 WS-F6K-PFC3B SAL15056DE8 2.6 Ok
6 MSFC3 Daughterboard WS-SUP720 SAL150560ZD 5.1 Ok
Mod Online Diag Status
---- -------------------
6 Pass
Router# sh diagno
Router# sh diagnostic result mod 6
Current bootup diagnostic level: complete
Module 6: Supervisor Engine 720 (Active) SerialNo : SAL15056J10
Overall Diagnostic Result for Module 6 : PASS
Diagnostic level at card bootup: complete
Test results: (. = Pass, F = Fail, U = Untested)
1) TestScratchRegister -------------> .
2) TestSPRPInbandPing --------------> .
3) TestTransceiverIntegrity:
Port 1 2
----------
U U
4) TestActiveToStandbyLoopback:
Port 1 2
----------
U U
5) TestLoopback:
Port 1 2
----------
. .
6) TestNewIndexLearn ---------------> .
7) TestDontConditionalLearn --------> .
8) TestBadBpduTrap -----------------> .
9) TestMatchCapture ----------------> .
10) TestProtocolMatchChannel --------> .
11) TestFibDevices ------------------> .
12) TestIPv4FibShortcut -------------> .
13) TestL3Capture2 ------------------> .
14) TestIPv6FibShortcut -------------> .
15) TestMPLSFibShortcut -------------> .
16) TestNATFibShortcut --------------> .
17) TestAclPermit -------------------> .
18) TestAclDeny ---------------------> .
19) TestQoSTcam ---------------------> .
20) TestL3VlanMet -------------------> .
21) TestIngressSpan -----------------> .
22) TestEgressSpan ------------------> .
23) TestNetflowInlineRewrite:
Port 1 2
----------
U U
24) TestFabricSnakeForward ----------> .
25) TestFabricSnakeBackward ---------> .
26) TestTrafficStress ---------------> U
27) TestFibTcamSSRAM ----------------> U
28) TestAsicMemory ------------------> U
29) TestAclQosTcam ------------------> U
30) TestNetflowTcam -----------------> U
31) ScheduleSwitchover --------------> U
32) TestFirmwareDiagStatus ----------> .
33) TestAsicSync --------------------> .
34) TestUnusedPortLoopback:
Port 1 2
----------
U U
35) TestErrorCounterMonitor ---------> .
36) TestFabricFlowControlStatus -----> U
37) TestPortTxMonitoring:
Port 1 2
----------
U U
38) TestSpuriousIsrDetection --------> U
39) TestL3HealthMonitoring ----------> U
40) TestOBFL ------------------------> .
41) TestCFRW:
Device 1 2
------------
U U
42) TestLtlFpoeMemoryConsistency ----> .
43) TestRwEngineOverSubscription ----> U
44) TestEARLInternalTables ----------> U
Router# sh power status mod 6
Pwr-Requested Pwr-Allocated Admin Oper
Slot Card-Type Watts A @42V Watts A @42V State State
---- ------------------ ------- ------ ------- ------ ----- -----
6 WS-SUP720-3B 282.24 6.72 282.24 6.72 on on
Router#
